Phone
Phone
Super soft, fingerprint-level skin-friendly touch
High resilience, extremely low compression set rate, and long-lasting resilience
Light load: The required closing pressure is extremely low, avoiding damage to precision parts
Closed-cell structure, dust-proof and water-proof, and can block micro-vibrations
The halogen content has been significantly reduced to below 1500ppm, far exceeding the industry's environmental protection standards
It maintains performance stability under operating conditions ranging from -40℃ to 120℃, and its performance remains excellent after thermal aging
The anti-aging performance has been enhanced through ultraviolet aging and ozone aging tests
The thermal conductivity is as low as 0.043 W/(m·K), and it has excellent heat insulation and preservation performance
The permanent compression set is ≤30%, and the rebound rate exceeds 90%, ensuring the durability of the seal
It meets the UL94 V-0 flame retardant grade, has low VOC emissions, and complies with automotive interior certification
Performance | TYE-1615F |
Density: kg/m³ | 160±50 |
Hardness Shore C | 15±8 |
Tensile strength MPa | ≥0.38 |
Elongation at break % | 93±30 |
Tear strength kN/m | 1.83±0.5 |
25% compressive strength kPa | ≥35 |
Compression set % | ≤30 |
High-temperature shrinkage rate % | ≤6 |
Water absorption rate % | ≤5 |
Flame retardant grade | UL94 V-0 |
Thermal conductivity W/(m·K) | ≥0.043 |
Volume resistance Ω | ≥1.93×10⁹ |
Temperature resistance range: ℃ | -40~120 |
