Phone
Phone
DY series silicone gaskets have a certain degree of softness and compressibility, of which the surface is sticky, and can be well bonded with foam.The product can be used to fill the gap, and can produce adaptive deformationdue to its own creep effect when extruded, thus reducing or eliminating stress, avoiding the appearance of top printing phenomenon, and achieving the effect of "soft marks". The product has excellent manufacturability and usability, of which the thickness is widely applicable, so that it is an excellent flexible filling material, widely used in electronic and electrical products.
| Basic performance | Test method | Typical value |
| Color | Visualization | Transparent body/black base film |
| Thickness（mm） Tolerance（%） | ASTM D374/D374M | 0.15 ±10 |
| 25%Compression-Rebound Stress（kPa） | / | 730~870 |
| Silicone rubber adhesion force（gf / 25 mm） | ASTM D1000（Peel PET black film 180°） | 20~40 |
| * High and low temperature cycling（ppm） | / | ＜200 |
| Volume Resistivity（Ω·cm） | ASTM D257 | 3.4×1015 |
| Recommended operating temperature（℃） | / | -40~120 |
*Refers to the total content of D3 to D10;
Note: For other thickness and viscosity materials, please contact our company for personalized customization.
